The Power Cut Nobody Rehearsed: Keeping Your SME Running When the Grid Lets You Down

  • 1 week ago
  • 0

It starts with a flicker. The lights go out, the tills stop, the phones fall quiet and the office Wi-Fi disappears. Someone says, “At least everything’s in the cloud.” Then it becomes clear that nobody can reach the cloud because the router, firewall and network switch are all in a dark cabinet.

For many UK SMEs, the critical gap in continuity planning is not the resilience of a cloud provider’s data centre. It is the power supply at the premises. As winter approaches, it is worth asking a simple question: if the electricity stopped here, what would still work, and for how long?

Cloud resilience meets the plug in your wall

Cloud services can reduce reliance on equipment in your office, but they do not make your premises independent of electricity. Staff still need powered devices, connectivity and a route into the services they use. If your internet connection, local network or phone system fails, a well-protected cloud platform may be out of reach.

The same applies to services that depend on on-site infrastructure. A payment terminal may rely on local networking. A cloud-managed camera system still needs power at the camera and network equipment. Remote staff may be able to continue, but only if they have working devices, access and a clear way to coordinate.

That is why power belongs in the same conversation as Cloud Solutions, Network Solutions and business continuity. The right question is not simply, “Is our data backed up?” It is, “Can people safely continue essential work when the office loses power?”

The UPS in the corner is not a plan

An uninterruptible power supply (UPS) can provide short-term battery power and help equipment ride through interruptions or shut down safely. But a UPS is not a magic box, and buying one is not the same as planning for an outage.

In many offices, a unit is tucked beside a cabinet and rarely considered again. Its battery may have lost capacity, its alarm may go unnoticed, or the equipment connected to it may have changed since installation. Unless it has been checked, nobody should assume it will provide the expected backup.

Treat every UPS as maintained infrastructure. Record what it protects, when its battery was last checked and when replacement is due. Confirm that alerts reach someone who will act on them. A UPS should be sized for the actual load and the time needed to take the next planned action, such as switching to a generator or shutting systems down cleanly. A qualified supplier or electrical specialist can help assess the load and installation requirements.

Find out what depends on site power

Start with an inventory of the equipment and business processes that need electricity at each premises. Include more than servers. Check network cabinets, switches, routers, firewalls, CCTV recorders and cameras, door controllers, phone handsets, payment terminals and any local storage or operational equipment.

Some businesses also have refrigeration, safety systems, specialist clinical equipment or machinery that needs separate consideration. A site walk-through with the people who use the equipment often reveals dependencies that an asset spreadsheet misses.

For businesses with on-site IBM i estates, the servers and supporting infrastructure depend on the same site power as other local systems. Include their shutdown requirements and recovery priorities in the plan.

Group equipment by what the business needs to preserve. For example, keeping a small set of communications and core networking equipment running may be more valuable than trying to power every desk. For each group, record its location, power source, UPS coverage and the person responsible for action during an outage.

A compact UPS beside a small business network rack, ready for inspection and maintenance

Size for a purpose, then maintain it

UPS capacity should reflect the connected equipment and the business’s required response time. An oversized or undersized unit can both disappoint: the first can waste budget, while the second may not support the intended load or shutdown sequence. Ask a competent specialist to check the equipment’s power demand, UPS capacity, battery condition and the desired runtime.

Decide what happens when battery power runs low. Servers and other equipment may support controlled shutdown, but the process needs to be configured and tested. Where power is restored, systems may need to restart in a deliberate order: network equipment first, then servers and applications, followed by dependent devices. Automatic restart should not be assumed to mean a safe or successful recovery.

Where a generator is part of the plan, define which loads it will support and who is responsible for starting it, monitoring it and arranging fuel. The changeover and installation must be appropriately designed and managed by competent professionals. A generator test should check more than whether the engine starts.

Battery replacement dates, inspection results and test records belong in routine maintenance, not a forgotten purchase file. Reviewing contracts and bills through Technology Expense Management can also help make ongoing technology and connectivity costs more visible, alongside the resilience decisions those costs need to support.

Blackouts are not the only power problem

A complete loss of supply is obvious. Brownouts, voltage dips, surges and brief interruptions can be less noticeable, but may still disrupt sensitive equipment or cause unexpected reboots. Ask whether the existing UPS and surge protection are appropriate for the devices they protect, and whether repeated power-quality issues should be investigated by an electrical specialist or the relevant network operator.

National Grid’s business power-cut guidance recommends considering controlled shutdown and restart, equipment that may create a surge when power returns, staff welfare, security, generators and alternative ways of working. Its checklist is useful for turning a general concern into specific actions for your premises.

Keep communications working

Phones and internet access are easy to overlook when planning for electricity loss. Modern handsets, routers, switches and phone systems may all depend on mains power. A mobile phone can help, but local mobile coverage, handset charge and network availability should not be assumed.

Consider whether a charged mobile phone, a separate mobile hotspot or 4G/5G failover could provide a practical alternative. The router or other equipment needed for that connection may itself need UPS power. An analogue phone may be a fallback only where the line and service remain usable without the affected power supply, so confirm how your particular arrangement works rather than relying on an assumption.

Staff also need a way to coordinate if the office is dark or the main collaboration tools are unavailable. Agree an out-of-band communication route, keep key contact details accessible outside the affected systems, and decide when staff should work from home, relocate or stop work. BCP Council’s business continuity guidance advises businesses to consider home working, internet access, staff communications, IT resilience and standby generation for critical equipment.

A desk with a corded telephone and mobile phone in a darkened office during an outage

Test the whole chain, not just the battery

A button test or a quick look at a UPS display is not a continuity exercise. Arrange a controlled test with the people responsible for your electrical and IT systems. Confirm that alerts are received, failover behaves as expected and equipment shuts down or restarts in the right order. Do not pull power to live equipment without a safe, agreed test procedure.

If there is a generator, test its operation and the transfer process under suitable conditions. Check who receives fault alerts and what happens if the generator does not start. Record results and assign actions for anything that fails.

Power testing is related to, but not a substitute for, Disaster Recovery testing. A power test checks how the premises and equipment respond to a loss of supply. Disaster Recovery testing checks whether systems and data can be restored to support the business. Both matter, and each needs its own objectives and evidence.

A practical first month plan

Keep the first review focused:

  1. Walk the premises. List powered equipment, essential processes, dependencies and responsible people.
  2. Inspect UPS units. Record protected loads, battery condition, alerting and replacement dates. Arrange specialist checks where needed.
  3. Agree the response. Set shutdown and restart priorities, generator responsibilities, communications routes and alternative working arrangements.
  4. Run a controlled exercise. Test alerting and the agreed failover or shutdown process, then record gaps and owners for follow-up.

Include the landlord or facilities manager early if you lease your premises. Clarify who maintains building systems, who can arrange access to electrical rooms, and who is responsible for generators, changeover equipment and repairs. Responsibilities vary by lease and site, so confirm them rather than relying on informal assumptions.

Power resilience is not a promise that nothing will stop. It is a plan for protecting people, preserving essential services and making recovery more predictable. The National Grid business checklist and BCP Council guidance offer practical starting points for reviewing your own arrangements.

The Fractal IT Director perspective is to make power resilience part of the organisation’s wider technology and continuity strategy, not a stand-alone hardware purchase. Strategic consultancy sets the priorities, acceptable downtime and investment case, and the same thinking runs across the wider Evestaff group of services at https://evestaff.co.uk. Managed IT Services, Helpdesk Support and Voice and Connectivity can then sit beneath that strategy as bolt-on execution services, supported by specialist partners where the work requires it. The plan owns the outcome; the equipment is only one part of getting there.

SEO keywords:
Cloud Solutions, Disaster Recovery, Dynamics 365 Jump Start, Helpdesk Support, IBM i Management, Managed IT Services, Network Solutions, Technology Expense Management, Voice and Connectivity

Join The Discussion